Canadian Security Install Reference
A 22-chapter prescriptive reference for Canadian institutional security installs: codes, pathways, cabling, access control, video, intrusion, and commissioning.
Why it exists
Canadian install guidance is scattered across CSA, ULC, the National Building Code, provincial supplements, and manufacturer documents that do not always agree. This reference pulls the parts that govern security install work into one place, organized the way the work is done on site.
Who it is for
Working integrators pulling cable and commissioning doors, designers and consultants writing the spec, architects and engineers checking security drawings against building drawings, project managers scoping and closing out the work, and owner-side technical staff who run the building after handover.
How each chapter is laid out
Chapters follow the construction divisions in the spec book: foundations and codes, Division 26 (pathways, power, grounding, firestop, labelling), Division 27 (cable, fibre, terminations, testing, switches), Division 28 (access control, video, intrusion), the specialized environments, and commissioning. Within a chapter, each topic gives when the rule applies, the spec itself, and a field note on what has held up on real projects.
What it is not
It is not a code book, a manufacturer's manual, or a substitute for licensed trades, the engineer of record, or the authority having jurisdiction. Buy the codes that apply to your work. Where this reference and a published standard, the project specification, or the AHJ conflict, they win.
Foundations
Division 26 · Electrical
- CH 02 Pathways and conduitConduit, raceway, and supports for Canadian institutional security installs. Conduit type by environment, support spacing, fittings, pull boxes, backboxes.
- CH 03 Power, UPS, and redundancyPower and UPS design for security systems in Canadian institutional installs. Branch circuits, dual-cord PDUs, surge protection, UPS sizing.
- CH 04 Grounding and bondingGrounding and bonding for Canadian institutional security installs. CEC Section 10, CSA T607 / ANSI-J-STD-607-A, TMGB and TGB sizing.
- CH 05 FirestoppingFirestopping for Canadian institutional security installs. ULC-S115 systems, fire-rated penetrations, smoke barriers, putty pads, and intumescent sealants.
- CH 06 Identification and labellingIdentification and labelling for Canadian institutional security installs. ANSI/TIA-606-D, cable label format, patch panel labelling, conduit colour banding.
Division 27 · Communications
- CH 07 Cable selection by environmentCable selection by environment for Canadian institutional security installs. Cat 6A, Cat 6, plenum (CMP), riser (CMR), general purpose (CM).
- CH 08 Fiber optic cablingFiber optic cabling for Canadian institutional security installs. OS2 single-mode, OM4/OM5 multimode, fiber count planning, loose-tube vs tight-buffered.
- CH 09 Termination proceduresTermination procedures for Canadian institutional security installs. Cat 6A keystone and patch panel terminations, T568A/B wiring.
- CH 10 Cable testing and certificationCable testing and certification for Canadian institutional security installs. ANSI/TIA-568.2-E parameters, permanent link vs channel test, autotest.
- CH 11 Network devices for securityNetwork device selection and configuration for Canadian institutional security installs: managed switches, PoE budgets, VLANs, and a configuration baseline.
Division 28 · Electronic Safety
- CH 12 Access control head-endAccess control head-end design for Canadian institutional installs. Platform selection, server sizing, Mercury hardware, HID Aero, Software House C-CURE.
- CH 13 Access control at the doorAccess control hardware at the door for Canadian institutional installs. Reader selection, OSDP vs Wiegand, electric strikes, maglocks, exit devices.
- CH 14 CCTV and videoVideo surveillance for Canadian institutional installs. Camera selection, resolution and PPF, lens choice, mounting, VMS platforms, storage, and retention.
- CH 15 Intrusion detectionIntrusion detection for Canadian institutional installs. ULC-S304 / S319 compliance, panel selection, sensor types (PIR, glassbreak, contact, beam, LiDAR).
Specialized Environments
- CH 16 Detention and high-securityDetention and high-security installs for Canadian institutional work. Anti-ligature hardware, pick-proof sealants, RGS-only pathway, sallyport interlocks.
- CH 17 Healthcare environmentsHealthcare security installs for Canadian institutional work. CSA Z32 patient-care areas, hospital-grade power, infant abduction systems.
- CH 18 Education and transitEducation and transit security installs for Canadian institutional work. K-12 lockdown integration, post-secondary residences.
- CH 19 Critical infrastructureCritical infrastructure security installs for Canadian institutional work. CSA Z246 oil and gas, electric utility substations, water and wastewater.
Hardware
Practice
- CH 21 Tools for the jobTools for Canadian institutional security install work. Hand tools, power tools, cable installation and termination tools, test instruments.
- CH 22 Commissioning and acceptanceCommissioning and acceptance for Canadian institutional security installs. Pre-commissioning verification, CAN/ULC-S1001 integrated systems testing.
Found a gap, a contradiction, or an AHJ interpretation worth recording? Send a correction.